MASTA CORE FEATURES
MASTA is made up of a core module and over 75 additional modules with additional design components & advanced analysis functionality, MASTA can be highly tailored to specific user or industry requirements.
Core Module Functionality
The core module provides a CAE environment for the design of gearbox & transmission systems using shafts, bearings & cylindrical gears.
Design features in the core module include:
- 2D design view with interactive 3D view
- Comprehensive bearing database with over 44,000 bearings in the catalogue
- Add cylindrical gears, shafts, bearings, clutches, synchronisers, splines & other couplings
- Specify power and point loads and configure load cases and duty cycles
- Edit shaft profiles including using imported 2D CAD drawing (.dwg/.dxf)
Analysis features in the core module include:
- Power flow
- System deflection
- Cylindrical gear loading and misalignments
- Cylindrical gear rating to ISO 6336, DIN 3990 and AGMA 2101-D04
- Bearing loading and misalignments
- Bearing rating to ISO 76, ISO 281 and ISO/TS 16281
- Shaft fatigue analysis & rating to DIN 743, AGMA or SMT
- Macro geometry optimisation for strength or contact ratio
Features in MASTA
The next generation in commercial grade CAE design, analysis and optimisation for mechanical transmissions
Below summarizes the major updates in tbe latest release of MASTA. For further details get in touch.
Full FE Mesh reduction and Analysis
- New module for import a full FE mesh of a housing or shaft and then perform a condensation on this model within MASTA
- Results for the full FE model may be expanded in MASTA to view stresses, deflections, mode shapes and energy content
- Key features include:
- Importing Full FE models to MASTA
- Performing stiffness and mass reduction in MASTA
- View deflections, stresses and strains following a System Deflection analysis in MASTA
- Expand FE results to view mode shapes and modal energy content following an NVH analysis in MASTA
Tooth Interior Fatigue Fracture (TIFF)
Allows users to predict crack initiation risk for TIFF based on the method of MackAldener. The module uses results from MASTA’s Loaded Tooth Contact Analyses and visualises the internal stress and fatigue stress.
Understanding of such a failure is becoming more essential to transmission development and optimisation can now be made early on in the design stage.
Loaded Tooth Contact Analysis Enhancements
A number of developments have been included regarding MASTA’s Loaded Tooth Contact Analysis. In particular:
- Including the effect of extended, off line of action, tip contact for both spur and helical gears
- Including the rim and web in the FE model for Advanced LTCA analyses
- Adding a number of further analysis results to the contact chart
- Additionally it is now possible to fix the Contact Chart scale to facilitate comparison between results
- A new option is available to run the LTCA analysis only for the first planetary mesh (i.e. the first planet angle)
Plunge Shaving Dynamics
A new module that enables simulation of the shaving force variation from the gear tip to root according to the shaving method, which determines whether the tooth profile will have additional profile/lead error
Hobbing Process Simulation
This newly revised and updated module considers the variety of static errors in the machining process for gear hobbing. The process simulation module can reproduce the gear geometry, including deviations, under the manufacturing conditions
Enhanced Mesh Coefficient of Friction Options for Power Loss/Efficiency Calculation
New Coefficient of Friction calculation methods are now available in addition to the previously available ISO/TR 14179-1:2001 method
Gear Flank Loading INDICATOR
Indication of which are the loaded gear flanks. In Powerflow mode you can visualise flank loading in both 2D and 3D Views. In other modes the option is available in 2D View
Inclusion of the Effect of Shot Peening on ISO Calculated Gear Bending Stresses
For ISO gear materials specify that a material is shot peened and then specify a Shot Peening Bending Stress Benefit percentage for inclusion in the gear rating
Gear Tolerance Standards
- When performing cylindrical gear rating to AGMA 2101-D04 it is now possible to specify to use the AGMA 2000-A88 and ANSI/AGMA ISO 1328-1-B14 Tolerance Standards in addition to the existing AGMA 2015-1-A01 standard
- When performing cylindrical gear rating to ISO 6336 it is now possible to specify to use the ISO 1328-1:2013(E)/ISO 1328-2:1997(E) Tolerance Standard in addition to the existing ISO 1328-1:1995(E)/ISO 1328-2:1997(E) standard
- It is possible to select the Tolerance Rounding System to be Metric or Imperial
Bevel/Hypoid Gear Misalignments
Include a table of misalignments calculated with respect to the gear mesh point in addition to the previous results that are calculated with respect to the cross point
Improved CAD Reports
- CAD reports have been enhanced from previous releases and now include the ability to add more data and information in CAD Gear Data Sheets
- Include images with property labels where values are updated to reflect the design/analysis values.
- Specify the CAD report template
Roller Bearing Improvements
Include user-specified X, Y factors for Dynamic Equivalent Load calculation for cylindrical roller bearings which can take axial load in addition to estimated factors.
Bring in basic design from LDP. This initial implementation is limited to internal or external cylindrical gear pairs and only macro geometry is currently imported.
FE Component Node Connection Report
Three new tables are included in the default report for an imported FE component in Design mode that show the expected and actual locations of the FE nodes on the connected component as an aid to assess the accuracy of the imported FE
Bearing Node Alignment with Imported FE
Specify whether FE condensation nodes for the bearings have been created at the centre of the bearing or at the centre of the bearing race. This is especially useful for bearings such as taper roller bearings where the race of the bearing is not always the full width of the bearing
Cylindrical Gear Misalignment Calculation Methods
Cylindrical gear misalignment calculations based on alternative misalignment definitions
AGMA Rating using LTCA Calculated Values
Use LTCA Stresses when performing gear rating according to AGMA 2101-D04 in Micro Geometry mode by selecting the option at the bottom of the AGMA rating options in the Cylindrical Gear Rating section of the Settings
A new option to specify the Welding/Structural Factor, Xw, as used in scuffing calculations
SMT Latest Tweet
Global #engineering services and #CAE software for the design, simulation, analysis and manufacture of transmission and drivetrain systems
We're exhibiting next week at the CTI Symposium in Berlin.
We’ll be on stand G29, so join us and see how MASTA and our CAE software can help your future and current projects.
Sign up and attend the event below 👇