Sir Colin Campbell Building Nottingham University

SMT talks gear durability at BGA’s Gears 2015

SMT will be joining a whole host of gear experts at this year's BGA Gears 2015 at the Sir Colin Campbell Building, Innovation Park, Nottingham University on the 12th November.

SMT joins Gleason in celebrating their 150th anniversary

Gleason will be hosting its annual Gear Solutions Forum from the 23rd-24th September where it all started in Rochester. As one of Gleason's strategic partners SMT will be attending, exhibiting and presenting at the show.
COBO Center Detroit

SMT will be at Gear Expo 2015

SMT will once again take part exhibiting it's latest CAE technology at the biennial Gear Expo this September in Detroit, MI.

SMT at VDI Congress – Drivetrain for Vehicles

SMT will be attending the 15th International VDI Congress - Drivetrain for Vehicles in Friedrichshafen, Germany. The event will run from the 16th to the 17th of June at which SMT will be demonstrating its latest and upcoming CAE solutions for drivetrain design, simulation, testing and analysis.

Warwick and SMT to Present Research on Polymer Gear Wear

As part of the Knowledge Transfer Partnership, the University of Warwick and SMT will be presenting and publishing a research paper entitled "The Wear and Thermal Mechanical Contact Behaviour of Machine Cut Polymer Gears"
Estrel Hotel Berlin

SMT to attend CTI Symposium Berlin 2014

From the 9th to the 10th of December SMT will be showcasing its technical services as well as demonstrating its forthcoming release of MASTA 6 at the 13th International CTI Symposium in Berlin.

SMT holds Cylindrical Gear Manufacturing Seminar

SMT holds a seminar on Cylindrical Gear Manufacturing Seminar in order to share its technical solution and unique approach with experts from over 30 world leading gear/drivetrain manufacturers.
Gareth Cooper at CTI

Solving Axle Noise Early in the Development Cycle

,
Air France industrial action kept Dr Langlois grounded en route to China so Gareth Cooper, Senior Transmission Engineer, took his place at the CTI show in China to present "The Noise Challenge".

Dr Langlois to tackle NVH at CTI Symposium China

Dr Paul Langlois, SMT’s CAE Development Manager, will be discussing the noise challenges facing drivetrain engineers and will focus on how gear whine can be solved early on in the design process with advanced CAE simulation.

SMT Demonstrates Solutions for Gear Manufacturers

SMT’s Feng Cao, Technical Director for Beijing, presented a report on “Scientific solutions to automobile gear manufacturing quality problems” during the 19th Annual Academic Conference held by SAE-China Gear Technology in Yuhuan, China

SMT Shares Insight on the Chinese Gear Industry

At the end of April SMT took part in a gear industry market demand and technical capability seminar held at the Beijing Construction Building. Attending were more than 150 representatives both commercial and academic.

The Engineering Simulation Show

On the 23rd April, at the Roundhouse Derby, SMT will be presenting the latest innovations in CAE software for gear design, simulation analysis and manufacture all integrated into one workflow, the MASTA Suite.