MASTA Overview - Tuesday 1st SeptemberModelling in MASTA (Part 1) - Thursday 3rd SeptemberModelling in MASTA (Part 2) - Tuesday 8th SeptemberFE in MASTA - Thursday 10th SeptemberAnalysis in MASTA (Part 1) - Tuesday 15 SeptemberTIFF - Wednesday 16 SeptemberAnalysis in MASTA (Part 2) - Thursday 17 September
Title: MASTA Overview
Series: Foundation (1 of 6)
Date: 1st September 2020
Time: Maximum 1 hour (8am-9am BST) & (4pm-5pm BST)
Host: Sam Webster
Details: The MASTA Overview workshop consists of a general demonstration of the most commonly used MASTA capabilities. This workshop should assist you in deciding whether to attend the more detailed sessions within the Foundation series.
No previous experience required.
Title: Modelling in MASTA – Part 1
Series: Foundation (2 of 6)
Date: 3rd September 2020
Time: Maximum 4 hours (6am-10am BST) & (2pm-6pm BST)
Host: Sam Webster
Details: The foundation series continues with Modelling in MASTA Part 1. We will take you through MASTA’s vast array of manual model building capabilities and show you where and how to access some of the more commonly used design properties for each major component type. This will be followed by a presentation aimed at giving you a greater understanding of how MASTA’s system model operates.
No previous experience required.
Agenda:
• Using the MASTA Interface
• Understanding the System Model
• Manual Model Building
• 2D CAD Model Building
Title: Modelling in MASTA – Part 2
Series: Foundation (3 of 6)
Date: 8th September 2020
Time: Maximum 4 hours (6am-10am BST) & (2pm-6pm BST)
Host: Sam Webster
Details: The foundation series continues with Modelling in MASTA Part 2. This session focuses on modelling using a 2D CAD guide, followed by specialised modelling examples such as planetary systems and non-parallel gear systems.
Previous attendance of Modelling in MASTA – Part 1 is recommended.
Agenda:
• 2D CAD Model Building (Continued)
• Specialist Model Overview (Planetary, Non-Parallel, etc)
Title: FE in MASTA
Series: Foundation (4 of 6)
Date: 10th September 2020
Time: Maximum 4 hours (6am-10am BST) & (2pm-6pm BST)
Host: Sam Webster
Details: The FE in MASTA workshop fully describes MASTA’s advanced FE import capabilities, from in-application shaft meshing to the import of a fully meshed FE housing model.
Previous attendance of both Modelling in MASTA workshops is recommended.
Agenda:
• Adding FE Housings to MASTA
• Meshing shafts in MASTA
• Adding FE shafts in MASTA
Title: Analysis in MASTA – Part 1
Date: 15th September 2020
Series: Foundation (5 of 6)
Time: Maximum 4 hours (6am-10am BST) & (2pm-6pm BST)
Host: Sam Webster
Details: The Foundation series continues with Analysis in MASTA – Part 1. In this session, we will begin to look at the analysis capabilities of MASTA, ranging from system analysis and component rating to some of the more detailed analysis modes.
It is recommended that attendees have some previous MASTA modelling experience, ideally through attendance of the Modelling in MASTA and FE in MASTA workshops.
Agenda:
• Loading Conditions
• Power Flow
• System Deflection
• Macro Geometry Mode
Title: TFF/TIFF
Series: Pro
Date: 16th September 2020
Time: Maximum 2 hours (8am-10am BST) & (2pm-4pm BST)
Host: Sam Webster
Presenter: Baydu Al
Details: General introduction to TIFF (Tooth Interior Fatigue Fracture) and TFF (Tooth Flank Fracture.
Attendees would be expected to have some previous MASTA modelling and analysis experience.
Title: Analysis in MASTA – Part 2
Series: Foundation (6 of 6)
Date: 17th September 2020
Time: Maximum 4 hours (6am-10am BST) & (2pm-6pm BST)
Host: Sam Webster
Details: The Foundation series concludes with Analysis in MASTA – Part 2. We will begin to delve deeper into some of MASTA’s more advanced analysis capabilities, showing how to unlock it’s full potential.
It is recommended that attendees have some previous MASTA modelling experience, ideally through attendance of the Modelling in MASTA and FE in MASTA workshops, along with Analysis in MASTA – Part 1.
Live, Interactive, Online
Why join our Online Training Workshops?
Fully immersive classroom experience from the comfort of your own home or office. Share your screen and use your microphone to fully engage in training workshops consisting of classroom demonstrations, group breakout rooms and detailed tutorial videos.
Interaction with our SMT trainers and other participants is highly encouraged!
Register
Please note: If you have attended previous online training, you are able to use your account and login for all future sessions.
Please email marketing@smartmt.com if you have any questions regarding our online training workshops.
Latest News
SMT Latest Tweet
Tomorrow and on Thursday we have two MASTA workshops scheduled, 'MASTA API Training (in Python)' and 'Flexible Splines in MASTA' respectively. For further information and to register your interest, please visit our workshops page: http://www.smartmt.com/online-training-workshops